2013 250cc Rolling Chassis - Assembled $7680.00 / Unassembled $7280.00
- RTS Frame - Mid-Rail 1 1/4 x .083 4130 (Chrome Molly)
- Choice of: Raised Left Bottom Rail or Non Raised Rail
- Choice of: Short or Long Rear Radius Rod Mounts or Both
- Fiberglass Hood & Engine Cover
- Kirkey Micro Light Weight Seat w/Upholstery
- All Aluminum Side Panels, Left Rock Guard, Front Rock Guard and Floor Pan
- Fiberglass Right Rock Guard and Large A Panels
- 16 Gallon Tail Tank w/Cap and Mounting Kit
- Complete Chrome Front Axle Assembly w/Billet Hubs
- Splined Rear Axle Assembly w/Double Floater Brake and Double Bearing Birdcage w/Grease Fitting
- Direct Steering w/Quick Release Hub
- 13" Longacre Steering Wheel w/Finger Grips
- Steel Body Shocks
- RTS Torsion Bars, Arms and Stops
- W-Link Assembly
- Swedged Radius Rods w/F & K Heims
- Chain Tensioner Assembly
- Shifter Assembly
- Brake and Throttle Pedals w/Hardware and Cable
- Master Cylinder, Brake Caliper, Pads
- Steel Braided Brake Line
- Simpson Belts - Choice of Colors
- 4 Beadlock Wheels - Champion
- American Racer and/or Hoosier Tires
- Chrome Front and Rear Wing Mounts
- Bumpers and Nerfs - Chrome or Stainless Steel
- Cable Wing Adjuster Assembly
- Wing Dynamics 12 sq Top Wing - 48" Panels
- Set-up Blocks
- Rear Axle Socket
Chassis Upgrades |
|
| Aluminum Body Shocks (Your Choice - Afco or Pro) | $300.00 |
| ARS Aluminum Body Oil Shocks - Non-Adjustable - Set of 4 | $360.00. |
| Penske - Non-Adjustable Shocks | $190.00 ea |
| Penske Adjustable Shocks w/Cable | $430.00 ea |
| ARS Oil Adjustable Shocks w/Cable | $335.00ea |
| Dri Bar Assembly | $875.00 |
| Weld Beadlock Wheels & Hubs | $356.00 |
| RTS Left Front Weight Jacker Assembly |
$125.00 |
| Wing Dynamics 54" Panels | $90.00 |
| Sandblast & Powdercoat Frame - 1 Step | $320.00 |
| Sandblast & Powdercoat Frame - 2 Step | $390.00 |
| Tail Tank w/Bladder | $780.00 |
| Rack & Pinion Steering | $300.00 |
| Ultra Shield Full Containment Seat w/Upholstery | $305.00 |
| Kirkey Sprint Seat with Upholstery | $30.00 |
| Kirkey Full Containment Seat w/Upholstery | $268.00 |
| Rear Bumper w/Hoop | $20.00 |
2013 250cc Conversion Kit - $3925.00 / 2012 250cc Frame Only - $1975.00
- RTS Frame - 4 Torsion Bar
- Fiberglass Hood and Right Rock Guard
- Aluminum Left and Right Body Panels
- Floor Pan, Engine Cover and Front Rock Guard
- Left Rock Guard
- 16 Gal. Tail Tank w/Cap and Mounting Kit
- Large Fiberglass A Panels - Left and Right
- Front Axle
- Left and Right Birdcage Assemblies w/ Reducers
- Panhard Bracket
- Torsion Arms and Stops
- Torsion and Steering Bushings
- Direct Steering Shaft
- Spherical Ball with Snap Ring
- Bumpers and Nerfs - Chrome or Stainless Steel
- Front and Rear Wing Mounts
- W-Link Assembly
- Swedged Radius Rods
- Dzus Springs and Rivets
- Set-up Blocks
2012 Point Champions
Copyright 2010 RTS Chassis, Inc.